Connect with us

Computers and Electronics

How to Descale a Keurig

4 Ways to Descale a Keurig. Over time, Keurigs can create lime range that affects the maker’s performance and also the taste of the coffee it brews. The good news is, it’s simple to descale a Keurig utilizing a cleaning solution or a couple of simple family components.

Preparing for Descaling

Get rid of any kind of Keurig k-cup loads from the brewer. You can obtain the channel or cup holder too, or you can leave them in. Leaving the channel or cup holder inside will assist the vinegar/cleaning option right into the leave spout as well as prevent any type of spills.

Take the storage tank out of the Keurig and also pour any kind of water into the sink. If there is a water filter inside, take it out as well as establish it aside.

Make certain that the automatic shut-off setup is shut off. You will certainly need to let any cleaning solution being in the larger Keurigs for a long period of time, and the brewer will certainly need to be on throughout this time.

Using Vinegar and Water

Fill the water storage tank half-way with distilled white vinegar. You will be using one component white vinegar to one component water. Using directly, pure vinegar can harm the inside of the device.

  • Avoid using apple cider vinegar. While is it possible to make use of apple cider vinegar to descale a Keurig, you will need to do extra rinses with fresh water in order to get all of the taste out.
  • You can also use lemon juice rather. Simply fill up the water tank half means with lemon juice. If the accumulation is excusable, after that load it just a 3rd of the method.

Fill the tank the remainder of the way with water. Do not transcend the leading fill line. The water will certainly dilute the vinegar and also make it safer for the Keurig.

Area a ceramic cup on the tray beneath the spout. Aim for something that holds regarding 10 ounces (300 milliliters) so that you do not get any type of overflows or spills.

Brew a mug of warm water, then put the water out into the sink. The vinegar will stream through the maker and liquify any lime scale accumulation.

Keep brewing and also unloading the water out until the tank is practically empty. Most Keurig makers will say “Include Water” on the screen or blink a light. If you are utilizing a smaller maker, such as a K10 Mini And Also or a K130 Maker, after that turn it off equally as it begins to leak warm water into your mug.

Allow the continuing to be vinegar to sit in the tank for 4 hrs. Once the reservoir is almost empty and the device shows “Include Water,” stop the mixture cycle and also allow the Keurig sit for four hrs. This will permit the vinegar to do its work inside the device.
Keep the maker on during this stage. If the “Auto Off” attribute is enabled, press Food selection two times to access the Car Off settings, then press the Left switch to cycle via the number of hours till it presents “Off.”.

Put remaining vinegar into a sink as well as wash it well. You wish to obtain all of the vinegar out of the tank before going on to the next action.

Fill up the reservoir with fresh water. Your Keurig will still have some vinegar inside it, so you will have to flush it out using fresh water. If you don’t do this, you will get bad-tasting coffee the following time you use your Keurig.

Make a mug of warm water. You may discover a solid, vinegar smell. This is regular. The odor will certainly minimize with each cup of warm water that you make.

Put the water out and put the mug back below the dispenser. Idea the cup over the sink and unload the water out. You do not need to wash the mug; just place it back onto the tray.

Maintain developing cups of warm water up until the storage tank is empty. Dump each mug of hot water into the sink before brewing one more. The strong vinegar odor will certainly get weaker with each mixture.

  • Small-capacity brewers, such as the K10 Mini Plus and the K130 Brewer will need about three brews.You may need to refill the reservoir with fresh water.
  • Larger brewers, such as the Keurig K-Cup Home series, the K145, K155 Brewers, Vue Brewers (V500, V600, V700), and Rivo Brewers, will need about 12 brews. You may need to refill the water reservoir in order to get that many.

Using Citric Acid and Water

Prepare the citric acid solution. You will need 1 to 2 tablespoons of citric acid per 4 mugs (1 litre) of water. You can find citric acid in the canning division of grocery stores. It may likewise be labeled as “sour soda” instead. Stir with a spoon to mix the citric acid right into the water.

  • If you are using a smaller, single-cup maker, such as a K10 Mini And Also or a K130 Maker, think about making use of 1 cup (240 milliliters) of liquid citric acid rather.

Pour the citric acid service into the storage tank. The citric acid will dissolve any type of lime scale accumulation inside your device.

Area a cup below the water drainage spout. Make sure the cup matches the brew size to make sure that you do not obtain any type of spills. You can additionally utilize a bigger mug.

Brew a mug of hot water. The citric acid will flow into the Keurig and also liquify any kind of accumulation inside.

Pour out the hot water and also mixture an additional cup. Maintain duplicating till the reservoir is empty.
If you are using a small brewer, such as the K10 Mini Plus or a K130 Brewer, after that transform it off equally as it begins to brew and also allow it sit for half an hour.

Fill up the tank with fresh water. When the reservoir is empty, take it out of the Keurig and also re-fill it utilizing great water. Put it back right into the Keurig once it is full. The maker will still have some citric acid inside, so you will require to flush it out. If you don’t, you will certainly obtain a poor preference the following time you try to brew coffee.

Keep brewing mugs of hot water up until there is absolutely nothing left in the reservoir. After you make a mug of warm water, put the water right into the sink as well as replace the cup under the dispenser.
If you are using a small brewer, such as the K10 Mini Plus or a K130 Brewer, then you will need to run the water via it concerning 6 times.

Using Keurig Cleaning Solution

Load the tank with one component Keurig Cleansing Solution and also one component water. You can likewise make use of a different sort of cleansing option, yet ensure to follow the recommended percentages on the tag. Here are some guidelines regarding just how much Keurig Cleaning Remedy and water you ought to use:

  • For the K10 Mini Plus and K130 Brewer, use one third of a bottle (4.6 ounces/136 milliliters) of cleaning solution liquid. Fill the tank the rest of the way with clean water.
  • For all other Keurig K-Cup Home series, the K145, K155 Brewers, Vue Brewers (V500, V600, V700), and Rivo Brewers, use the entire bottle of cleaning solution. Fill the empty bottle with clean water, and pour that into the water tank as well.

Location a huge mug under the dispenser. Make certain that the brew size matches the cup size to make sure that you do not get any kind of spills.

Brew one cup of hot water, after that put the water out. Raise the take care of, wait 5 secs, after that lower the manage. Press the “brew” switch as well as wait till the cup fills up. Dispose the hot water into the sink and change the mug.

Repeat till the water is all gone, after that wait half an hour. Maintain developing mugs of hot water and pouring the water out of the cup up until there disappears water. When the “Add Water” warning comes on, stop and also wait half an hour. Make sure that the machine remains on throughout this time around. The cleansing fluid will service dissolving any kind of build-up inside the maker during this moment.

  • If you have a K10 Mini Plus or a K130 Brewer, start to brew another cup, then turn the Keurig off just as the water starts to come out. Wait 30 minutes, then turn the Keurig on and finish brewing the last cup. You may have to lift the handle and press back down on it get it to start brewing.
  • If you have one of the Rivo Brewers, there is no need to wait 30 minutes. Simply proceed to the next step.

Wash the tank as well as load it with fresh water. When the storage tank runs out cleansing option in it, draw it out and wash it. Replenish it utilizing amazing water. There will still be some cleaner inside your equipment, so you will require to remove it out making use of fresh water.

Brew a cup of hot water, after that pour it out. You will need to repeat this action numerous times up until there is no cleaner left inside your Keurig. If you do not do this, you will certainly obtain a negative preference the next time you use your device. Right here are some standards regarding how many mixtures you need to do:

  • For the K10 Mini Plus and K130 Brewer, you will need to do about three brews.
  • For all other Keurig K-Cup Home series, the K145, K155 Brewers, Vue Brewers (V500, V600, V700), and Rivo Brewers you will need to do about 12 brews.


  • Consider descaling your Keurig every three to six months.
  • If the Keurig monitor indicates that the machine must be descaled when you have just performed the process, you may need to repeat the cleaning and rinsing process.
  • If you live in an area where the water has a high mineral content (including hard water and well water), consider descaling your Keurig every three months.
  • If the brewer doesn’t fill anymore, turn the machine off and unplug it. Plug it back in and try running a cup of hot water. If it still doesn’t fill, unplug it and wait 30 minutes before re-plugging it and running a hot water brew.


  • You may see some single brew cleaning cups in the store. Know that these only clean the Keurig cup, funnel, and dispenser. They do not clean the water reservoir and the tubes inside the Keurig through which the water flows (and where most of the lime scale build-up is).
  • Avoid using baking soda and water to descale your Keurig. Baking soda is abrasive, making it a great cleaning agent, but it also does not rinse out well; it will only add to the build-up, making it worse.
Continue Reading
You may also like...

More in Computers and Electronics



To Top
error: Alert: Content is protected !!